PC Recording Software - The Two Types Needed For Home Audio Recording
By Jake Weston and Ken Theriot
PC recording software has a lot different types and capabilities. What I want to focus on here is software you can use to record music or voice overs onto your computer. That narrows it down to two categories of audio recording software: programs to use for "tracking" or getting the sound into the PC or Mac, and programs used for editing audio after it has been recorded.
Audio Tracking Software
I should mention that there is considerable overlap between the two kinds of program I am describing, but the main distinction is that one is primarily used to record the sound (music, voice over, etc.), and the other is primarily used to modify the audio in some way, usually by altering the actual audio file (destructive editing). For audio tracking you will absolutely want the ability to multitrack. What I mean by this is that you need to be able to record one item on one track (say, an acoustic guitar), a second thing (say, a singer's voice) on a second track that will play back AT THE SAME TIME as the first track, etc. If a tracking program can do multitrack recording, the number of tracks you can record (remember...all playing back at the same time) is usually unlimited. That means you'll be able to do some very cool things like record yourself singing harmony with yourself (a quartet or entire choir!), add guitar, drums, piano, etc. and be a one-person band. This is truly the killer app for computer recording. In the old days it was difficult and expensive to do multitrack recording. When using audio tape, the professionals used tape so wide (usually 2 inches), and moving so fast through a recording machine (usually 15 inches per second) that there was minimal noise and maximum audio quality. Consumers were left with two choices, pay to rent time at a commercial studio, or buy a machine yourself. Regular people could generally only have multitrack cassette recorders whose maximum track count was usually 4 because cassette tapes were so narrow. Because of the limitations, audio quality was not great coming from these consumer multitrackers. So maybe you can imagine why it is such a big deal that software allows good audio quality and unlimited track count! Anyway, audio tracking programs are frequently referred to as digital audio workstations (DAWs). You "lay down" (record) one track, then another, then another, etc. until you've recorded all you need. Then you pan each track to make it sound like it's coming from the left side of the listener, the right side, or the middle. You might also want to put some effects on each track to get them to sound just right. When you're done with all that you mix all the tracks down into a stereo file. Nowadays this is also called rendering.
Audio Editing Software
Like I said, there is significant overlap between these two types of audio program. For example, most editors can also record audio as well. But you usually can't do multitrack recording with an editor. For the purpose of this article, I want to focus on the editor's use once multiple tracks have been mixed down/rendered to a single file. Sometimes this is called mastering. Though in truth, audio editors have many other uses.
So after you've mixed all your audio tracks down to a single final stereo sound file in your DAW, you're ready to use your editing software. The primary difference now is that you're working on how one single file sounds, rather than how a bunch of different bits of audio sound, alone and together with the other bits of audio. That is such a big mindset difference that in the music business it is common for different people entirely to do each job. For most home recording projects though, we frequently end up doing both jobs. You open the file in the editing program and turn it into a final product by slicing, fading, turning up, turning down the file, and other actions that modify the audio in some way. For example, if I were doing the final edits for a song, I would make sure any extraneous noise at the beginning and end of the song are cut out, and that the song starts and ends smoothly. Sometimes there's a count-in, or someone coughing just at the start or end. An editor can slice those right off. Next you'll want to pay attention to loudness. In order to get the entire song loud enough, you may need to turn sections of the song down before you can increase the average loudness of the file. You can read more about this process of compressing or limiting audio in another article on the Home Brew Audio site. Other things you can do in the final editing stage is filter out parts of the song that may be too loud, like certain bass frequencies, or SSS sounds, etc. Or you may want to turn up some frequencies. Then you might want to add some effects like echo or reverb. When you've finished editing your song, you save it as a single stereo file (though it could be mono or even surround these days), and now the audio is ready to use in any way you see fit.
Examples of tracking software, or DAWS are: Reaper, Pro Tools, and Cakewalk Sonar. Popular editors include Audacity, Adobe Audition and Sound Forge.
So as a review, there are two main types of audio software, tracking programs and editing programs. You use the first type to record all the different audio onto tracks, apply track effects and mix all the tracks together to create one single audio file. Then you open the file in your editor and snip, stretch, massage, squash and polish it until it sounds just right, and you save it as the final product. Believe it or not, that is a nutshell version of audio production in general:).
Learn to record and produce professional-sounding audio from home. Home music recording or voiceover recording, fun and short video tutorials show you how. We'll show you how to start with a $0-$5 budget, and then how to improve your studio for a few dollars at a time as your knowledge and confidence increase. If you would like to start doing home recording on computer, visit us here: [http://www.homebrewaudio.com/pc-recording-software-the-two-kinds-you-need-for-home-audio-recording]PC recording software
Home Brew Audio main page: www.homebrewaudio.com
Article Source: PC Recording Software - The Two Types Needed For Home Audio Recording
Saturday 8 January 2011
Recording Studios - The Expertise of Professional Recording Technicians
Recording Studios - The Expertise of Professional Recording Technicians
By Alan De Vendra
A recording studio is a specialized environment in which sounds and voices are captured and recorded. Ideally, recording studios are purpose-built built and designed with acoustic values at the forefront, to ensure that recordings are not affected in any way by external noise.
A studio can be used for many different disciplines, from creating music tracks by an individual artist or band to the recording of voiceovers and sound design for TV ads and programs.
Studios are commonly made up of two separate rooms, usually adjoined. The Live room is where the artist, band or vocalist will perform their recording. The other room is called the control room, where the sound engineer operates all the technical recording equipment used for recording, mixing and maximizing the sounds.
Larger purpose-built recording studios usually also have what is known as Isolation rooms. Usually smaller, this is where instruments that need to be played at a higher volume are recorded, so the sound does not leak into other microphones being used to simultaneously record other instruments or voices. The individual audio elements are then mixed together in the control room.
Studios these days are equipped with a multitude of different technologies that is used to bring together all the different parts of a performance. Along with the microphones and monitors in the live room, some studios even provide extra instruments for bands that would be impractical to hire in, or that are collectible - such as a grand piano or a Fender Rhodes.
The main feature of the control room is the mixing desk, but it also has equipment like multi-track recorders, speakers or studio monitors, digital audio workstations, equalizers and other outboard equipment, and programming workstations.
Since the reign of analog and solid-state equipment in the late 80's, recording equipment has advanced to the digital age in which much recording is done using computers.
Digital recording produces a very crisp sound which some audiophiles call sterile, especially compared to vintage analogue equipment which produces a warmer sound.
But what if you're a band that is performing a live concert that you want recorded? You can't bring 50 to 60 thousand fans into a studio!
This is when a mobile recording unit is required. Mobile recording companies are professional recording technicians that specialize in 'OB' - outdoor broadcast or recording of music events.
This is quite an involved and technical task requiring a lot of different elements that have to come together.
When working with a live band and live audience, careful positioning of different types of equipment is essential. With any live event, there is only one chance to capture the performance.
Multiple microphones need to be in place to capture not only the band, but the feel of the audience.
Later, the live concert recording can be mixed down and balanced in the recording studios. During this process, unwanted noises can be edited or filtered out, overdubs and other enhancements can be added in post-production.
The final mix should sound like natural balance between the performers, with the fans providing excitement and atmosphere.
The Rockinghorse residential recording studio complex offers an unparalleled degree of sophistication and comfort that includes not only a world class recording facility with the very latest cutting edge technology, but a stunningly elegant and secluded workspace that nurtures inspiration.
Article Source: Recording Studios - The Expertise of Professional Recording Technicians
By Alan De Vendra
A recording studio is a specialized environment in which sounds and voices are captured and recorded. Ideally, recording studios are purpose-built built and designed with acoustic values at the forefront, to ensure that recordings are not affected in any way by external noise.
A studio can be used for many different disciplines, from creating music tracks by an individual artist or band to the recording of voiceovers and sound design for TV ads and programs.
Studios are commonly made up of two separate rooms, usually adjoined. The Live room is where the artist, band or vocalist will perform their recording. The other room is called the control room, where the sound engineer operates all the technical recording equipment used for recording, mixing and maximizing the sounds.
Larger purpose-built recording studios usually also have what is known as Isolation rooms. Usually smaller, this is where instruments that need to be played at a higher volume are recorded, so the sound does not leak into other microphones being used to simultaneously record other instruments or voices. The individual audio elements are then mixed together in the control room.
Studios these days are equipped with a multitude of different technologies that is used to bring together all the different parts of a performance. Along with the microphones and monitors in the live room, some studios even provide extra instruments for bands that would be impractical to hire in, or that are collectible - such as a grand piano or a Fender Rhodes.
The main feature of the control room is the mixing desk, but it also has equipment like multi-track recorders, speakers or studio monitors, digital audio workstations, equalizers and other outboard equipment, and programming workstations.
Since the reign of analog and solid-state equipment in the late 80's, recording equipment has advanced to the digital age in which much recording is done using computers.
Digital recording produces a very crisp sound which some audiophiles call sterile, especially compared to vintage analogue equipment which produces a warmer sound.
But what if you're a band that is performing a live concert that you want recorded? You can't bring 50 to 60 thousand fans into a studio!
This is when a mobile recording unit is required. Mobile recording companies are professional recording technicians that specialize in 'OB' - outdoor broadcast or recording of music events.
This is quite an involved and technical task requiring a lot of different elements that have to come together.
When working with a live band and live audience, careful positioning of different types of equipment is essential. With any live event, there is only one chance to capture the performance.
Multiple microphones need to be in place to capture not only the band, but the feel of the audience.
Later, the live concert recording can be mixed down and balanced in the recording studios. During this process, unwanted noises can be edited or filtered out, overdubs and other enhancements can be added in post-production.
The final mix should sound like natural balance between the performers, with the fans providing excitement and atmosphere.
The Rockinghorse residential recording studio complex offers an unparalleled degree of sophistication and comfort that includes not only a world class recording facility with the very latest cutting edge technology, but a stunningly elegant and secluded workspace that nurtures inspiration.
Article Source: Recording Studios - The Expertise of Professional Recording Technicians
How to Make Money With Your Home Recording Studio
How to Make Money With Your Home Recording Studio
By James R. Nelson
Home recording studios are a very hot market in several industries right now such as audio equipment, home remodeling and home income opportunities to name a few. So hot, in fact, it has brought about the closing of some big-name studios due to people deciding to do it all themselves. Furthermore, this is a sector of people that have largely been ignored by these industries until recently. Consequently, the growing demand has stimulated interest to supply it on numerous key fronts leading to increased quantity and improved quality of the many component choices there are to make.
Building your own home recording studio can save you a huge amount of money if it's done correctly, and if not, it can cost you just as much and more. The facilities are typically designed in a way so that they are divided into three major zones, each adequately sound-proofed and separated from the others. The main action takes place in the studio proper, also at times referred to as the "live room." It is essential that the rooms are carefully designed so that they have good acoustics and that there is good isolation between the rooms.
Home recording studios are easily equipped and have prospered with the reduction in costs of Musical Instrument Digital Interface (MIDI) equipment, accessories, and digital recording software. The use of electronic instrumentation or an isolation box or booth can solve small recording studio sound problems introduced by drums and electric guitars that challenge the home studio recording artist.
At some point you can also capitalize on the opportunity of being able to charge others for the use of your recording facilities and services. Recording studios are a major investment for any performing artist, and for the price of a demo session, you could have your own home studio setup. In fact, it's possible for amateur and career musicians to outfit a home studio so it can successfully compete with expensive professional studios.
Recording studios are one of the most alluring businesses in the world. Many people fantasize about having this kind of profession. They are rapidly proving that they can be successful business ventures, too, given the right location and the right promotion. Here are three more key factors that contribute to success:
1) Charge appropriately. You can only make money if you set your prices sufficient to cover costs and earn a profit. As a studio owner, your time is money as well - and you have to charge accordingly. A lot of people think opening a studio and charging dirt cheap prices will help them win customers. WRONG! That's a recipe for disaster. Believe me, you need to know this before you ever consider starting a studio business.
2) You need to learn and apply the 80/20 rule of recording studio headaches. You will find that 80% of your stress and problems come from 20% of your clients. And the worst part is... those clients aren't worth the money that they are paying you. It is very important to learn how to filter out problem customers so that you can maximize the time you spend with friendly, high-paying customers. Why? Because that will bring you even more business later! Yes, you read that right. The best customers will send you more new clients to work with. But you have to learn how to make them do this.
3) You can turn many of your friends into the best "street team" on the planet! It's quick, it's effective, and it will make you more money than you can imagine. Plus, your street team will love you. Almost everyone you know is going to be interested in your studio business. You have a cool job! Get used to it. When you tell people about it, they will want to get involved. Learn to harness that power! Make more money from their work. That's how the world's richest business moguls get the job done.
So, the bottom line is that there can surely be a lot of fame and fortune and glamour and pleasure gained from owning and operating a home recording studio properly and profitably. It can also be your biggest nightmare. If your enthusiasm for the former is greater than your fear of the latter, then I encourage you to learn all the tricks of the trade from a master like Reuben Rock of Memphis, TN. My best advise for enterpreneurs and those who aspire to be is to "Do what you do do well, then find others to do the rest best."
James Richard Nelson enjoys Helping People Help Themselves through his articles and websites. Visit http://www.jujamvideoreview.com/ to discover more ideas and suggestions on that topic in general.
Article Source: How to Make Money With Your Home Recording Studio
By James R. Nelson
Home recording studios are a very hot market in several industries right now such as audio equipment, home remodeling and home income opportunities to name a few. So hot, in fact, it has brought about the closing of some big-name studios due to people deciding to do it all themselves. Furthermore, this is a sector of people that have largely been ignored by these industries until recently. Consequently, the growing demand has stimulated interest to supply it on numerous key fronts leading to increased quantity and improved quality of the many component choices there are to make.
Building your own home recording studio can save you a huge amount of money if it's done correctly, and if not, it can cost you just as much and more. The facilities are typically designed in a way so that they are divided into three major zones, each adequately sound-proofed and separated from the others. The main action takes place in the studio proper, also at times referred to as the "live room." It is essential that the rooms are carefully designed so that they have good acoustics and that there is good isolation between the rooms.
Home recording studios are easily equipped and have prospered with the reduction in costs of Musical Instrument Digital Interface (MIDI) equipment, accessories, and digital recording software. The use of electronic instrumentation or an isolation box or booth can solve small recording studio sound problems introduced by drums and electric guitars that challenge the home studio recording artist.
At some point you can also capitalize on the opportunity of being able to charge others for the use of your recording facilities and services. Recording studios are a major investment for any performing artist, and for the price of a demo session, you could have your own home studio setup. In fact, it's possible for amateur and career musicians to outfit a home studio so it can successfully compete with expensive professional studios.
Recording studios are one of the most alluring businesses in the world. Many people fantasize about having this kind of profession. They are rapidly proving that they can be successful business ventures, too, given the right location and the right promotion. Here are three more key factors that contribute to success:
1) Charge appropriately. You can only make money if you set your prices sufficient to cover costs and earn a profit. As a studio owner, your time is money as well - and you have to charge accordingly. A lot of people think opening a studio and charging dirt cheap prices will help them win customers. WRONG! That's a recipe for disaster. Believe me, you need to know this before you ever consider starting a studio business.
2) You need to learn and apply the 80/20 rule of recording studio headaches. You will find that 80% of your stress and problems come from 20% of your clients. And the worst part is... those clients aren't worth the money that they are paying you. It is very important to learn how to filter out problem customers so that you can maximize the time you spend with friendly, high-paying customers. Why? Because that will bring you even more business later! Yes, you read that right. The best customers will send you more new clients to work with. But you have to learn how to make them do this.
3) You can turn many of your friends into the best "street team" on the planet! It's quick, it's effective, and it will make you more money than you can imagine. Plus, your street team will love you. Almost everyone you know is going to be interested in your studio business. You have a cool job! Get used to it. When you tell people about it, they will want to get involved. Learn to harness that power! Make more money from their work. That's how the world's richest business moguls get the job done.
So, the bottom line is that there can surely be a lot of fame and fortune and glamour and pleasure gained from owning and operating a home recording studio properly and profitably. It can also be your biggest nightmare. If your enthusiasm for the former is greater than your fear of the latter, then I encourage you to learn all the tricks of the trade from a master like Reuben Rock of Memphis, TN. My best advise for enterpreneurs and those who aspire to be is to "Do what you do do well, then find others to do the rest best."
James Richard Nelson enjoys Helping People Help Themselves through his articles and websites. Visit http://www.jujamvideoreview.com/ to discover more ideas and suggestions on that topic in general.
Article Source: How to Make Money With Your Home Recording Studio
PC Recording Software - Reaper
PC Recording Software - What Is The Best?
By Jake Weston and Ken Theriot
What is the best PC recording software around? Well before I say anything more, I should point out that I am in no way affiliated with any of the products I will mention in this article. I have simply been using them for several years now. One of my mandates (yeah I give myself mandates;)) is to help folks record professional sounding audio from a PC recording studio using knowledge as leverage, as opposed to money. And the knowledge I refer to starts out distilled down to several easy-to-learn key audio principles that anyone can put to work making their music, podcasts, sales videos, etc. sound AWESOME. Oh, and I also believe that anyone can start out with a budget of "0-to-5 dollars."
That last part isn't because I think you can rival top-notch gear with a 5-dollar studio. It's because it's important for you to learn how to squeeze the best possible quality from the cheapest possible gear. Once you understand how to do that, you can make wiser choices when adding gear to your home recording studio. Ultimately, this means you will be able to avoid the all-too-common pitfall of home recordists, which is buying way too much gear for way too much money, and then proceed to continue making crappy audio because they didn't understand some basic audio principles. How does that sound? Get better quality and spend less, MUCH less? Yeah, I thought that might interest you.
When I say "best" in this article, I'm referring to the whole package, including price and capability. Plus this is all my humble (not really;)) opinion anyway. So let's get to it.
1. Don't Fear the Reaper
Remember, I have no affiliation here. But it is my strong opinion that you should run, not walk (or the cyber-equivalent) to the Reaper site on the web and download their free trial software now. The trial version is no different from the "full" version, not crippled in any way. The stated evaluation period is 30 days, but guess what? The program does not stop working after 30 days. You will simply be reminded every time you open it that it is not free forever. This allows you to be more flexible when testing it out, taking more time than usual if need be. It's on the honor system. Yeah, I know. Who does that? But that isn't the end. Once you are ready to purchase a license, you have two choices (and remember, the software is the same regardless of what license you have), the discounted license for $40, or the full commercial license for $150. Again it is up to your honor to decide which license to buy. The guideline for the discounted license says (from their site) you can use it if:
You are an individual, using REAPER only for personal use.
You are an individual or business, using REAPER for commercial use, and the yearly gross revenue does not exceed USD $20,000.
You are an educational or non-profit organization.
If you do find yourself making $20,000 from the recordings made with Reaper, then you will not mind springing for the $150 full commercial license, I presume.
2. How Well Does It Work?
Really well. Oh, you want details. Alright, here goes. I use it every day to record voiceovers, podcasts, music, and any number of other audio products. Reaper does everything I need it to and a LOT of stuff I don't need often. IN fact, the capability is so vast that there are things it can do that I don't even know about. And I use it every day, and have for 5 years. Using Reaper, I've produced pop music CDs (Raven Boy Music), countless voiceovers, audio books, royalty-free music, podcasts, videos, etc. For a complete description of what it can do, go to their site. But if you want to record and mix multi-track, hi-resolution audio fast, including MIDI capability and built-in effects (lots of them), Reaper is what you need.
3. What's the Catch?
Reaper is tracking and mixing software. That means if you want to do destructive editing of audio files, you will probably want to also use an audio editing program such as Audacity (free), Sound Forge, Adobe Audition, etc. I have Adobe Audition, but since I have been using Reaper, I've used Audition less and less because Reaper offers a lot of editing capability as well, and it's non-destructive. The only thing I find myself using my editor for these days is noise reduction, and other treatment (some call it mastering ) of the mixed-down stereo (usually) end-product. One other thing I am led to understand is an issue with Reaper is its MIDI capability. But they are constantly upgrading that. And to tell you the truth, I love using Reaper for MIDI. I use it for virtual instruments all the time. I think it works great. But if you are like, a MIDI ninja, you may find this program a bit lacking, or so I am told. I am not a MIDI ninja.
So there you have it. You can start using what I consider to be the best PC recording software around for free, right now. After you've come to the conclusion that it's awesome, just pay $40 for a license. Then after you make $20,000 with it, spring for the $150 clams it will cost for the full commercial license. You will thank me.
Jake Weston and Ken Theriot
Get Your Free Module of the video tutorial course: "The Newbie's Guide to Audio Recording Awesomeness" here: Home Brew Audio "pc recording studio"
More free home recording resources here: Home Brew Audio
Article Source: PC Recording Software - What Is The Best?
By Jake Weston and Ken Theriot
What is the best PC recording software around? Well before I say anything more, I should point out that I am in no way affiliated with any of the products I will mention in this article. I have simply been using them for several years now. One of my mandates (yeah I give myself mandates;)) is to help folks record professional sounding audio from a PC recording studio using knowledge as leverage, as opposed to money. And the knowledge I refer to starts out distilled down to several easy-to-learn key audio principles that anyone can put to work making their music, podcasts, sales videos, etc. sound AWESOME. Oh, and I also believe that anyone can start out with a budget of "0-to-5 dollars."
That last part isn't because I think you can rival top-notch gear with a 5-dollar studio. It's because it's important for you to learn how to squeeze the best possible quality from the cheapest possible gear. Once you understand how to do that, you can make wiser choices when adding gear to your home recording studio. Ultimately, this means you will be able to avoid the all-too-common pitfall of home recordists, which is buying way too much gear for way too much money, and then proceed to continue making crappy audio because they didn't understand some basic audio principles. How does that sound? Get better quality and spend less, MUCH less? Yeah, I thought that might interest you.
When I say "best" in this article, I'm referring to the whole package, including price and capability. Plus this is all my humble (not really;)) opinion anyway. So let's get to it.
1. Don't Fear the Reaper
Remember, I have no affiliation here. But it is my strong opinion that you should run, not walk (or the cyber-equivalent) to the Reaper site on the web and download their free trial software now. The trial version is no different from the "full" version, not crippled in any way. The stated evaluation period is 30 days, but guess what? The program does not stop working after 30 days. You will simply be reminded every time you open it that it is not free forever. This allows you to be more flexible when testing it out, taking more time than usual if need be. It's on the honor system. Yeah, I know. Who does that? But that isn't the end. Once you are ready to purchase a license, you have two choices (and remember, the software is the same regardless of what license you have), the discounted license for $40, or the full commercial license for $150. Again it is up to your honor to decide which license to buy. The guideline for the discounted license says (from their site) you can use it if:
You are an individual, using REAPER only for personal use.
You are an individual or business, using REAPER for commercial use, and the yearly gross revenue does not exceed USD $20,000.
You are an educational or non-profit organization.
If you do find yourself making $20,000 from the recordings made with Reaper, then you will not mind springing for the $150 full commercial license, I presume.
2. How Well Does It Work?
Really well. Oh, you want details. Alright, here goes. I use it every day to record voiceovers, podcasts, music, and any number of other audio products. Reaper does everything I need it to and a LOT of stuff I don't need often. IN fact, the capability is so vast that there are things it can do that I don't even know about. And I use it every day, and have for 5 years. Using Reaper, I've produced pop music CDs (Raven Boy Music), countless voiceovers, audio books, royalty-free music, podcasts, videos, etc. For a complete description of what it can do, go to their site. But if you want to record and mix multi-track, hi-resolution audio fast, including MIDI capability and built-in effects (lots of them), Reaper is what you need.
3. What's the Catch?
Reaper is tracking and mixing software. That means if you want to do destructive editing of audio files, you will probably want to also use an audio editing program such as Audacity (free), Sound Forge, Adobe Audition, etc. I have Adobe Audition, but since I have been using Reaper, I've used Audition less and less because Reaper offers a lot of editing capability as well, and it's non-destructive. The only thing I find myself using my editor for these days is noise reduction, and other treatment (some call it mastering ) of the mixed-down stereo (usually) end-product. One other thing I am led to understand is an issue with Reaper is its MIDI capability. But they are constantly upgrading that. And to tell you the truth, I love using Reaper for MIDI. I use it for virtual instruments all the time. I think it works great. But if you are like, a MIDI ninja, you may find this program a bit lacking, or so I am told. I am not a MIDI ninja.
So there you have it. You can start using what I consider to be the best PC recording software around for free, right now. After you've come to the conclusion that it's awesome, just pay $40 for a license. Then after you make $20,000 with it, spring for the $150 clams it will cost for the full commercial license. You will thank me.
Jake Weston and Ken Theriot
Get Your Free Module of the video tutorial course: "The Newbie's Guide to Audio Recording Awesomeness" here: Home Brew Audio "pc recording studio"
More free home recording resources here: Home Brew Audio
Article Source: PC Recording Software - What Is The Best?
How to Build a Recording Studio
How to Build a Recording Studio
By Sarit Bruno
Studio Considerations
The magic of the recording studio has often mystified even the most seasoned professionals. With all the knobs, switches and buttons on various gear and large format consoles, no wonder confusion sets in to most non-techies. Many people, especially artists, composers, producers, and engineers, will end up putting together their own studio for writing and pre-production, with some eventually deciding to take the plunge and create a full-fledged recording complex that is capable of recording major albums. This article will try to shed some light on the considerations to take into account when making a studio, be it a small home studio or a professional recording studio.
Is size important? Some may say it is so but this is not always the case. The dimensions of the studio are very important. A room too large may become over-reverberant or full of unwanted echoes. A room too small may sound tight and unnatural. It is important that the room size and room sound is relevant to the type of music you are recording. You don't want to go into a very small tight room to record BIG rock drums. Although, big room sounds can be achieved by adding external reverb effects to simulate rooms at a later time when necessary.
It is best to find the room that suits the sound you are trying to achieve from the beginning of the recording process. The smaller the room, the smaller and tighter the sound will be; this is not necessarily a bad thing. Small tight rooms can be good for vocals, guitars and percussion if you are going for a tight clean sound. Larger rooms have more air for the sound to travel in, so it will be in fact a bigger more open sound. The sound has a longer travel time for the sound wave to move, therefore the reflection from the walls will take longer to bounce back creating a bigger more spacious sound. The decision of size and sound has to be made early on before the recording starts. One advantage that a larger room will have is the ability to be scaled down by closing up the room using modular baffles or gobos (go betweens). Gobos are structures that are partitions, that help to block sound by placing them in between the musicians, instruments, and microphones. Placing the gobos around the microphone at a close distance will help a large room with too much ambiance sound smaller. This will eliminate the reflections coming off of the walls that are further away.
Small rooms can produce big heavy tight sounds with the absence of the decay from the reverb that is caused from big rooms. Sometimes a large room can sound like it's washed out, or far away. With a good engineer any room can sound amazing with a little adjusting. A poor sounding room can be manipulated to sound good, although it requires much more work and time. Deciding on the proper room size for your needs is critical to the sounds that get re-produced. This will highly dictate the type of sound the microphones will pick up.
Clapping your hands in a room can give a good representation of what a room will sound like. The reflection coming off the walls will be picked up by a simple hand clap. The true test is to try out some instruments or vocals and position them in various sections of the room until reaching the optimum sound quality. If one side of the room sounds bad try a different spot or move around into a corner until the sound is improved.
Experimenting with different sections of the room also keeps the sound fresh when recording many instruments. If the acoustic guitars are recorded in the center of the room, when the time comes to record the electric guitars you may try recording them in a corner of the room for a different room sound. This gives clarity on the final mix creating separation and providing more distinction on various sounds.
If you are starting your own studio, remember that the bigger the studio the higher amount the bills will be. The benefit is that larger studios can charge more for their studio rates.
Getting the Necessities
If you happen to reach that elite 2% and become that million dollar, hit selling, famous producer or artist (or if you just win the lotto), then you might eventually think about buying serious studio gear and setting up your own producer paradise.
Acquiring the proper equipment and labor is key to a great studio and successful recordings. Studio gear is expensive and the knowledge of those who use the gear does not come cheap. Hiring the right people can save money and time in the long run. Studio designers also are specialty breeds that can make or break your studio. Your buddy Joe the carpenter may be able to help build it for less, yet if the studio is not properly isolated for sound it is a great waste of time, energy and finances.
The studio engineer is also the focal point of the sound that is created. Having an experienced engineer involved in the process will make your sound have a character of its own. He is the extra set of ears that gives another dimension to your productions. He is also a critical consulting partner when building or choosing to rent a studio. Let the experts help you with advice, it will create less of a headache in the long run. The experienced engineer can fill you in on all the equipment needed for recording the music that is relevant to your world. He can also give some guidelines on how the studio should be setup before having to consult a designer. There is no room for guessing or assumption on these issues.
Check List: Part 1
When purchasing studio gear it is wise to research only what is absolutely essential for your style of music. If you're not recording live drums in your studio, there is no need to buy a plethora of microphones for them. By being patient and shopping around for the best prices, a mass amount of money can be saved in the end. When you save $50 to $100 bucks on each piece of gear it really adds up in the end, and there is a ton of gear needed to put a proper studio together.
Below is a basic studio checklist that will be discussed in further detail in later articles. These are the essentials of modern day recordings and the tools that are most commonly used in the best studios around the world.
The Studio Gear Checklist:
Recording / Mixing Console the engineer or producer operates the console that controls all of the levels for recording, playback and mixing.
This is the big board that has all the buttons, switches, knobs, faders which control the levels and signal routing for each instrument. This could be referred to as a board, console or mixer. The most common consoles in major studios are SSL (Solid State Logic) or Neve. The console is the most important piece of gear in the studio. It controls the overall operations of signal flow and sound manipulation. The console allows for each instrument to be on its own channel on the board. Each channel may then have effects inserted into its signal path to enhance the sound. A signal may also be routed to external gear for further manipulation. Anything that can be imagined, can be done. There are no rules for experimenting with sound. A signal can be sent to reverbs, delays, compressors, guitar amps, speakers in hallways for re-recording
Each channel strip on a decent console will contain: Faders, Preamps, Panning, Equalization, Filters, a Routing Matrix, AUX Sends and Returns, Dynamics, Muting, & Solo.
Other Features Of The Console: Inserts, Outputs, Monitoring, Automation, Fader Grouping, Bussing, Splitting...
Patchbay
Allows the studio to combine interconnectivity with all the equipment by using patch cables. The patchbay can be configured for each studio's specific equipment requirements. All of the outboard gear, console and recording devices inputs and outputs are hard wired to the patchbay. The Patchbays can be be analog or digital. The most common is the bantam TT cable configurations.
Check List Part 2:
Microphones Microphones pickup the initial sound source. The mic is the first source in the recording process receiving and converting the sound wave into electrical energy to be amplified, transmitted and recorded.
Preamps Amplifies the original signal coming from the mic or instrument. Gives initial control of the recording levels. Preamps are located on the console or as external outboard gear.
DI Boxes The Direct box is used mainly for instruments such as keys and bass to be compatible with mic inputs. The DI box transforms line levels of instruments to mic level for console and preamp inputs.
Compressors Helps to further control levels and dynamics coming from the preamp or console. Usually comes in rack mounted outboard gear or software plugins for DAWs. Compressors keep levels from peaking into distortion levels and help to bring lower levels louder.
FX Processors For special effects like adding space, dimension, pitch and time delays on signals and recorded tracks. Usually comes in rack mounted outboard gear or software plugins for DAWs. Multi-FX processors may have reverb, delay, flangers, EQ, compression and more all in one unit.
FX Pedals Small floor foot pedals originally designed for guitar FX processing. These pedals are created for distortion and special effects, which add space, dimension, pitch and time on guitars mainly, but are an inexpensive alternative used as outboard gear for other instruments.
DAW The Digital Audio Workstation is like an entire studio inside of a computer. Protools, Logic and Nuendo are just a few DAWs that provide a digital multi-track recorder, a virtual console, a wide variety of effects, editing, and sequencing(musical programming) possibilities. The DAW uses software, hardware and computers in combination to operate.
Check List: Part 3
Control Surface The control surface acts as a console that controls a DAW or external machine. The control surface usually has faders, knobs and buttons that are controlled by the computer connected to a DAW. This makes operating the DAW similar to analog operations by being able to put your hands on faders instead of clicking a mouse. Some control surfaces have all the same features as a console. The most common control surfaces are made by Digidesign.
Clocking Digital recorders use different clocking formats to operate properly. Digital units sample the sound to be replicated. Clocking refers to the amount of time in between samples taken for reproduction. If the digital clocking is off it will sound jittery or add noise to the sound in the analog to digital conversion. A quality clock will improve the sound. Some common digital clock sources can be found in products made by Prism, Rosendahl, DCS, and Aardsync to name a few. Some clocks have sync generators built in to lock up with other machines.
Sync Generator Generates tones to allow communication between machines so that several recording devices can be synchronized together and operate at the same speed. Clocking works with synchronization (sync) when analog and digital equipment is combined. Sync uses SMPTE, MTC (midi time code), Midi Clock, MMC (midi machine control) to allow recording on several DAWs and tape machines to be linked up together.
CD Recorder Records and plays back compact discs. Gives the ability to record stereo mixes and playback these mixes on other CD players. CD standard for consumer playback is a sample rate of 16 bit and a sampling rate of 44.1kHz. Sony, Tascam, Alesis, and Yamaha all make good studio CD recorders.
Tape Machines Recording machines that use analog or digital tape for recording and playback of music. Some purists in sound recording prefer the sound of analog tape. There are many digital tape machines used for recording both music and video.
Cabling Literally miles of various cabling could be needed for a single studio. Common cables in sound reproduction are XLR balanced mic cables and Unbalanced 1/4 inch instrument cables.
Monitors / Amps Speakers in the studio are referred to as Monitors. Powerful clean amps are needed to run monitors. Many monitors are self powered, which means that they have built in amplifiers. Monitors usually consist of high frequency tweeters, low frequency woofers and cabinets that contain the speakers and components.
Headphones / Distribution By using a set of earphones this allows communication between the control room and the studio, also allows pre-recorded tracks to be heard during the overdubbing process. Headphones are also referred to as cans.
Instruments / Keyboards / Drums / Guitars These are more of the tools of the craft. You may have all the best studio gear in the world, but if the instruments sound bad you are starting in the wrong place. Anything could be considered an instrument if it makes noise that could possibly be recorded on a record.
Amplifiers This is often referred to as an amp. Amps increase the amplitude or volume of electrical signals from sound waves. These are used in powering speakers. Guitar and Bass amps can be used for many other applications such as running a vocal or snare drum through them.
Microphone Stands A wide variety of sizes and styles are needed for a proper studio. The mic stand helps to get the microphone placed properly for the best sound quality possible.
Studio Furniture There are many types of racks and furniture designed to hold consoles and outboard gear. The interior decoration of the studio completely sets the vibe of the working environment.
Electricity
Nothing will work without electricity unless you're jamming at the local drum circles down on the beach. Electrical installation studio power is often overlooked. Studios will setup a "clean feed" that is a separate breaker from the rest of the general power that is being used for air conditioning, lighting and the basic necessities of the rest of the building. Have you ever plugged something in and heard that horrific buzzing sound coming from the speakers or guitar amp? This is usually due to bad electrical wiring, which causes ground noise. This is the first thing to listen for when going in to a studio session. A simple solution to the problem would be to use a simple ground lifter on the gear or lift the ground from a direct box which can also solve the problems. We will go into details later.
Isolated electrical circuits for each individual room are a must in a recording studio. The proper amount of amperage is also a must. Not enough amperage will surely cause your breakers to blow. Consult with an Electrician who is familiar with studio setups to insure that wiring and voltage is regulated and conforming with local codes.
Unregulated Power Supplies (UPS) should also be in place just in case there is a power failure. This will insure that valuable equipment will not blow up or cause a fire. If there is a case of a power outage the UPS will provide enough time to backup important computer files and safely turn off your equipment. Some studios will have complete generator systems in place to keep the studio running for the remainder of the session.
Improper lighting can also cause buzzing ground issues, especially fluorescent bulbs. Avoid using these in any studio. Dimmers can also cause many problems. The average household dimmers will surely put a damper into a clean sound. Make sure that professional grade dimmers are installed to avoid ground noise. Always listen carefully to signals being recorded before committing to a final take. There are a countless number of accounts that the engineer discovers electrical noise on takes during the mix process.
If you are serious about your studio, may I suggest balance power or a separated panel with neutral power conditioning. The evil problems of ground issues are a direct reflection of sources returning or looking for a different ground. Voltage potential between neutral and ground will certainly change your way of looking at things... for example, .5 volts between neutral and ground is the maximum allowance by UL code that electronics will operate optimally without potential induction issues. I would suggest having a meter installed to rate this. Logging this information and having a good rapport with the local electric company would not hurt at all.
Air Conditioning/HVAC
This is another very important area that is often not considered. Studio gear gets very hot. The lack of adequate cooling could result in equipment failure or damage. Blowing up equipment is no fun and it gets very expensive. Some recording studios have a separate Machine Room for computers, tape machines and power amps that is highly air-conditioned to keep everything cool. This also cuts down on the noise from the fans on such units, which can distract concentration from listening in detail in the control room. Having too much air conditioning could also result in moisture or condensation build-up that may also damage the gear. Water in general is bad for electronic gear.
The return air system is used to pull heat out of needed areas and also provides an air intake for the AC units. These are placed in key areas where there is a build-up of heat from the gear, for example near the console or in the machine room.
Separate Rooms: Control Room
Most studios have several isolated areas for recording, mixing, and production. Soundproofing is the main agenda when creating multiple rooms in a studio. To achieve this, the main objective is to make the rooms airtight. If air cannot leak in or out of a room, there will be less chance of sound leaking in or out as well.
Most pro studios have double doors that create a sound lock to help prevent noise leakage. They also have very thick double walls with interior air gaps to also help trap unwanted sound. The floors in the studio should also be floated which means they are lifted from the ground to help further prevent extra vibrations and leakage.
The first focus would be the Control Room where the mixing console and outboard gear are contained. This is where all of the recording and mixing is controlled, hence control room. The acoustics in this room should be designed for hearing the exact sound that is being recorded or mixed. The sound of the room should be as natural as possible for accurate representation of the original sound translated to the speakers in the room.
The first rule for an appropriate acoustically treated room is that there should be no parallel walls .If you were to clap your hands in a room with hard parallel walls you would here the sound bouncing back and forth, this is known as a flutter echo. This is neither good for recording or mixing. The trapping of unwanted bass is important for a room to sound great as well. Twenty five percent of the room should be assigned for bass traps for an adequate mixing room.
Separate Rooms: Live Rooms
The next focus of equal importance would be the Live Room where the music is recorded. This is where the musicians and vocalists perform on the microphones. Live rooms should have more versatility to be able to adapt to different recording situations. Wood floors for example are great for reflection of sound, which creates a brighter tone. If a warmer tone is wanted, one could simply place a rug on the floor. Many live rooms also have a great deal of glass to see between rooms for communication. This is also very reflective. Many studios use curtains to control the amount of reflections coming off glass or hard walls. Non-parallel walls are again needed to eliminate any flutter echoes.
Some studios also contain a vocal booth within the live room. This would be a smaller room designed for vocals. They may also be used for guitar amps and other instruments. There are no rules for what this can be used for; its main purpose is for additional isolation during the recording process. Glass doors or windows are used for visibility of the artists and those working in the control room.
Many elaborate studios may have multiple control rooms and production suites. Lounges and proper bathroom facilities are important in keeping the creativity flowing. A dining area and kitchen are also a consideration if budgets permit. Many hours are spent in the studio when working on projects. It is important to have all the comforts of home to keep everyone happy.
A few proper offices are necessary for the client to be able to have private internet access and to handle business without any distractions. All studios are designed differently. Whatever can be imagined can be created. There are no rules, only guidelines.
Acoustics
Sound is a wave, much like the ripples on a still body of water when a rock is dropped into it. The larger the wave, the lower the tone. Lower tones, known as bass frequencies, travel in wide long waves while higher tones known as treble frequencies travel in a tighter, shorter wave. Frequencies heard by the human ear range from 20Hz to 20K. Just as an indication, a piano's range, probably the widest range of any instrument, is from 39Hz on the low note and 3Khz on the high note.
Sound is measured in decibels also represented as dB. An average concert is about 95-100 dB while a heavy rock concert or hip hop concert could reach levels of 130dB. This is above the threshold of pain; so don't forget to wear your earplugs which are designed to protect your hearing when in extreme sound levels. Interestingly enough, whales can actually produce levels of up to 180dB. It should be remembered that taking care of your ears is the most important thing you can do to prevent damage and have a sustained career. So don't hang out with any whales and put some protection in your ears when exposed to loud volumes.
Absorption is the act of a sound wave being soaked up by a particular material. This is measured by co-efficient ratings. The higher the sound absorption co-efficient rating, the more sound that is being eliminated from troubled spots in your room. Different section of the room may require different co-efficient ratings. Remember that studios start off as an empty shell. Hard surfaces and walls need treatment to provide for a great sounding room. For example, 20 gauge theater curtains are commonly used in studios. They consist of a thick velvet material, which is excellent for absorbing high-end frequencies. The thinner materials soak up higher frequencies.
The thicker materials soak up lower frequencies. This is why thick bass traps are very large and contain ports or holes to trap low-end frequencies. The larger the port, the lower the frequency absorption.
There are endless amounts of products and designs that are used in the industry. Wall panels are also commonly used to absorb sound. These are made from a fiberglass product wrapped in a cloth material. Various sizes and thickness are used for problem frequencies. Again the thin materials eliminate high end and thicker materials absorb low end.
Reflection is the opposite of absorption. Think of the sound as a wave hitting a mirror and bouncing back. This can be used as an advantage for a brighter tone. If a room has too much absorption causing the room to sound too dead, hard surfaces such as wood panels can be placed in strategic locations to add a more live sound to the room.
Some studios have reversible hanging panels that can be flipped between reflective and absorptive to change the room sound at will. For vocals the room may need a more dead sounding absorptive room. Drums may require a more live sounding room. John Bonham, from Led Zeppelin had an amazingly huge live reflective drum sound. This became the goal for the big Rock drum sound.
Prince is underestimated as a drummer. He has a great tight drum sound on his first record where he played all of the instruments as well as the drums. The drums have just the opposite effect using absorption in a small tight room creating a very in your face heavy Pop drum sound.
These are not rules, only guidelines. Using your ears is always the key to getting the best sound.
Designing a studio is quite an undertaking to do professionally. Each room is completely separated and isolated from one another. The most common method is to actually build a room inside of a room. The inner walls do not touch the outer walls, which creates an air gap that traps sound. Each wall can be many feet thick and multiple layers of thick glass and doors divide the rooms.
The floors in each room are floated from the ground with spacers that also create an air space to lower vibrations and help to trap unwanted sound leakage. All floors have different characteristics in the way sound waves bounce off from their surfaces. While wood floors have a warm tone, concrete and tile have a brighter tone. This also holds true for walls.
A solid plan is needed to run cabling between rooms so that each room can be interconnected with each other for microphone signal lines and headphone communication systems. Custom made cable troughs or PVC tubing is used to send groups of microphone cables from a panel to the control room. From the control room the Headphone lines would be run through the walls for communication between all of the rooms.
Materials and Tools
Drywall is needed for walls. The more layers of drywall added will increase the thickness of the studio walls. By using varying thicknesses of drywall stacked and shifted, alternating at the seams will help minimize sound transmission between rooms. Many drywall screws and a good electric drill will definitely come in handy if you are building a studio.
Fabric is used for making wall panels and ceiling clouds that control the absorption in the studio. There are specific fabrics that are designed for different frequency absorption. Each thickness and texture has varying co-efficient ratings at multiple frequency bands.
AC Duct Board and other fiberglass products are wrapped in fabric with spray glue to create absorbing panels called Wall Boxes and Bass Traps. Thermal Fiber or Fiberglass Insulation is inserted in between two sets of walls and ceiling to create an additional thickness providing an alternate texture, containing fiberglass, which is superb for capturing sound.
Sand is also an excellent alternative choice for filling walls to prevent sound wave transmission. Wood provides the skeleton for frames that hold the panels and boxes. Larger Bass Traps with large ports could be made from wood or fiberglass. RPG panels are a series of wooden slats mathematically designed to absorb and refract, or soak up and scatter sound inside a room. Wood can also be used to create custom racks to hold the outboard gear, console and patchbay. Custom studios can be designed for any situation and style.
Doors, Walls and Windows
Doors and walls are the single most important item where recording studio sound bleed is concerned. A small 1/4inch air gap at the bottom threshold of a door will release 30% of the sound. Creating airtight rooms are the first step in sealing all the gaps for optimum sound proofing. The transitions between where the rooms are connected have more possibilities for sound leakage. All corners, gaps and frames for door and window cutaways must be sealed with a silicon or caulking material. Keep in mind that if air can escape through any passage then sound will surely go through as well.
Sarit Bruno manages content and editorial line for Audiofanzine
AudioFanzine offers benchmark testing/reviews of products, software or instruments and articles of a tutorial nature, all of which are systematically illustrated by exclusive videos or audio extracts. Addressing a universal audience, both amateurs and professionals alike, http://Audiofanzine.com addresses musicians as well as sound engineers, home-studio recording enthusiasts, and audio and lighting engineers.
Article Source: How to Build a Recording Studio
By Sarit Bruno
Studio Considerations
The magic of the recording studio has often mystified even the most seasoned professionals. With all the knobs, switches and buttons on various gear and large format consoles, no wonder confusion sets in to most non-techies. Many people, especially artists, composers, producers, and engineers, will end up putting together their own studio for writing and pre-production, with some eventually deciding to take the plunge and create a full-fledged recording complex that is capable of recording major albums. This article will try to shed some light on the considerations to take into account when making a studio, be it a small home studio or a professional recording studio.
Is size important? Some may say it is so but this is not always the case. The dimensions of the studio are very important. A room too large may become over-reverberant or full of unwanted echoes. A room too small may sound tight and unnatural. It is important that the room size and room sound is relevant to the type of music you are recording. You don't want to go into a very small tight room to record BIG rock drums. Although, big room sounds can be achieved by adding external reverb effects to simulate rooms at a later time when necessary.
It is best to find the room that suits the sound you are trying to achieve from the beginning of the recording process. The smaller the room, the smaller and tighter the sound will be; this is not necessarily a bad thing. Small tight rooms can be good for vocals, guitars and percussion if you are going for a tight clean sound. Larger rooms have more air for the sound to travel in, so it will be in fact a bigger more open sound. The sound has a longer travel time for the sound wave to move, therefore the reflection from the walls will take longer to bounce back creating a bigger more spacious sound. The decision of size and sound has to be made early on before the recording starts. One advantage that a larger room will have is the ability to be scaled down by closing up the room using modular baffles or gobos (go betweens). Gobos are structures that are partitions, that help to block sound by placing them in between the musicians, instruments, and microphones. Placing the gobos around the microphone at a close distance will help a large room with too much ambiance sound smaller. This will eliminate the reflections coming off of the walls that are further away.
Small rooms can produce big heavy tight sounds with the absence of the decay from the reverb that is caused from big rooms. Sometimes a large room can sound like it's washed out, or far away. With a good engineer any room can sound amazing with a little adjusting. A poor sounding room can be manipulated to sound good, although it requires much more work and time. Deciding on the proper room size for your needs is critical to the sounds that get re-produced. This will highly dictate the type of sound the microphones will pick up.
Clapping your hands in a room can give a good representation of what a room will sound like. The reflection coming off the walls will be picked up by a simple hand clap. The true test is to try out some instruments or vocals and position them in various sections of the room until reaching the optimum sound quality. If one side of the room sounds bad try a different spot or move around into a corner until the sound is improved.
Experimenting with different sections of the room also keeps the sound fresh when recording many instruments. If the acoustic guitars are recorded in the center of the room, when the time comes to record the electric guitars you may try recording them in a corner of the room for a different room sound. This gives clarity on the final mix creating separation and providing more distinction on various sounds.
If you are starting your own studio, remember that the bigger the studio the higher amount the bills will be. The benefit is that larger studios can charge more for their studio rates.
Getting the Necessities
If you happen to reach that elite 2% and become that million dollar, hit selling, famous producer or artist (or if you just win the lotto), then you might eventually think about buying serious studio gear and setting up your own producer paradise.
Acquiring the proper equipment and labor is key to a great studio and successful recordings. Studio gear is expensive and the knowledge of those who use the gear does not come cheap. Hiring the right people can save money and time in the long run. Studio designers also are specialty breeds that can make or break your studio. Your buddy Joe the carpenter may be able to help build it for less, yet if the studio is not properly isolated for sound it is a great waste of time, energy and finances.
The studio engineer is also the focal point of the sound that is created. Having an experienced engineer involved in the process will make your sound have a character of its own. He is the extra set of ears that gives another dimension to your productions. He is also a critical consulting partner when building or choosing to rent a studio. Let the experts help you with advice, it will create less of a headache in the long run. The experienced engineer can fill you in on all the equipment needed for recording the music that is relevant to your world. He can also give some guidelines on how the studio should be setup before having to consult a designer. There is no room for guessing or assumption on these issues.
Check List: Part 1
When purchasing studio gear it is wise to research only what is absolutely essential for your style of music. If you're not recording live drums in your studio, there is no need to buy a plethora of microphones for them. By being patient and shopping around for the best prices, a mass amount of money can be saved in the end. When you save $50 to $100 bucks on each piece of gear it really adds up in the end, and there is a ton of gear needed to put a proper studio together.
Below is a basic studio checklist that will be discussed in further detail in later articles. These are the essentials of modern day recordings and the tools that are most commonly used in the best studios around the world.
The Studio Gear Checklist:
Recording / Mixing Console the engineer or producer operates the console that controls all of the levels for recording, playback and mixing.
This is the big board that has all the buttons, switches, knobs, faders which control the levels and signal routing for each instrument. This could be referred to as a board, console or mixer. The most common consoles in major studios are SSL (Solid State Logic) or Neve. The console is the most important piece of gear in the studio. It controls the overall operations of signal flow and sound manipulation. The console allows for each instrument to be on its own channel on the board. Each channel may then have effects inserted into its signal path to enhance the sound. A signal may also be routed to external gear for further manipulation. Anything that can be imagined, can be done. There are no rules for experimenting with sound. A signal can be sent to reverbs, delays, compressors, guitar amps, speakers in hallways for re-recording
Each channel strip on a decent console will contain: Faders, Preamps, Panning, Equalization, Filters, a Routing Matrix, AUX Sends and Returns, Dynamics, Muting, & Solo.
Other Features Of The Console: Inserts, Outputs, Monitoring, Automation, Fader Grouping, Bussing, Splitting...
Patchbay
Allows the studio to combine interconnectivity with all the equipment by using patch cables. The patchbay can be configured for each studio's specific equipment requirements. All of the outboard gear, console and recording devices inputs and outputs are hard wired to the patchbay. The Patchbays can be be analog or digital. The most common is the bantam TT cable configurations.
Check List Part 2:
Microphones Microphones pickup the initial sound source. The mic is the first source in the recording process receiving and converting the sound wave into electrical energy to be amplified, transmitted and recorded.
Preamps Amplifies the original signal coming from the mic or instrument. Gives initial control of the recording levels. Preamps are located on the console or as external outboard gear.
DI Boxes The Direct box is used mainly for instruments such as keys and bass to be compatible with mic inputs. The DI box transforms line levels of instruments to mic level for console and preamp inputs.
Compressors Helps to further control levels and dynamics coming from the preamp or console. Usually comes in rack mounted outboard gear or software plugins for DAWs. Compressors keep levels from peaking into distortion levels and help to bring lower levels louder.
FX Processors For special effects like adding space, dimension, pitch and time delays on signals and recorded tracks. Usually comes in rack mounted outboard gear or software plugins for DAWs. Multi-FX processors may have reverb, delay, flangers, EQ, compression and more all in one unit.
FX Pedals Small floor foot pedals originally designed for guitar FX processing. These pedals are created for distortion and special effects, which add space, dimension, pitch and time on guitars mainly, but are an inexpensive alternative used as outboard gear for other instruments.
DAW The Digital Audio Workstation is like an entire studio inside of a computer. Protools, Logic and Nuendo are just a few DAWs that provide a digital multi-track recorder, a virtual console, a wide variety of effects, editing, and sequencing(musical programming) possibilities. The DAW uses software, hardware and computers in combination to operate.
Check List: Part 3
Control Surface The control surface acts as a console that controls a DAW or external machine. The control surface usually has faders, knobs and buttons that are controlled by the computer connected to a DAW. This makes operating the DAW similar to analog operations by being able to put your hands on faders instead of clicking a mouse. Some control surfaces have all the same features as a console. The most common control surfaces are made by Digidesign.
Clocking Digital recorders use different clocking formats to operate properly. Digital units sample the sound to be replicated. Clocking refers to the amount of time in between samples taken for reproduction. If the digital clocking is off it will sound jittery or add noise to the sound in the analog to digital conversion. A quality clock will improve the sound. Some common digital clock sources can be found in products made by Prism, Rosendahl, DCS, and Aardsync to name a few. Some clocks have sync generators built in to lock up with other machines.
Sync Generator Generates tones to allow communication between machines so that several recording devices can be synchronized together and operate at the same speed. Clocking works with synchronization (sync) when analog and digital equipment is combined. Sync uses SMPTE, MTC (midi time code), Midi Clock, MMC (midi machine control) to allow recording on several DAWs and tape machines to be linked up together.
CD Recorder Records and plays back compact discs. Gives the ability to record stereo mixes and playback these mixes on other CD players. CD standard for consumer playback is a sample rate of 16 bit and a sampling rate of 44.1kHz. Sony, Tascam, Alesis, and Yamaha all make good studio CD recorders.
Tape Machines Recording machines that use analog or digital tape for recording and playback of music. Some purists in sound recording prefer the sound of analog tape. There are many digital tape machines used for recording both music and video.
Cabling Literally miles of various cabling could be needed for a single studio. Common cables in sound reproduction are XLR balanced mic cables and Unbalanced 1/4 inch instrument cables.
Monitors / Amps Speakers in the studio are referred to as Monitors. Powerful clean amps are needed to run monitors. Many monitors are self powered, which means that they have built in amplifiers. Monitors usually consist of high frequency tweeters, low frequency woofers and cabinets that contain the speakers and components.
Headphones / Distribution By using a set of earphones this allows communication between the control room and the studio, also allows pre-recorded tracks to be heard during the overdubbing process. Headphones are also referred to as cans.
Instruments / Keyboards / Drums / Guitars These are more of the tools of the craft. You may have all the best studio gear in the world, but if the instruments sound bad you are starting in the wrong place. Anything could be considered an instrument if it makes noise that could possibly be recorded on a record.
Amplifiers This is often referred to as an amp. Amps increase the amplitude or volume of electrical signals from sound waves. These are used in powering speakers. Guitar and Bass amps can be used for many other applications such as running a vocal or snare drum through them.
Microphone Stands A wide variety of sizes and styles are needed for a proper studio. The mic stand helps to get the microphone placed properly for the best sound quality possible.
Studio Furniture There are many types of racks and furniture designed to hold consoles and outboard gear. The interior decoration of the studio completely sets the vibe of the working environment.
Electricity
Nothing will work without electricity unless you're jamming at the local drum circles down on the beach. Electrical installation studio power is often overlooked. Studios will setup a "clean feed" that is a separate breaker from the rest of the general power that is being used for air conditioning, lighting and the basic necessities of the rest of the building. Have you ever plugged something in and heard that horrific buzzing sound coming from the speakers or guitar amp? This is usually due to bad electrical wiring, which causes ground noise. This is the first thing to listen for when going in to a studio session. A simple solution to the problem would be to use a simple ground lifter on the gear or lift the ground from a direct box which can also solve the problems. We will go into details later.
Isolated electrical circuits for each individual room are a must in a recording studio. The proper amount of amperage is also a must. Not enough amperage will surely cause your breakers to blow. Consult with an Electrician who is familiar with studio setups to insure that wiring and voltage is regulated and conforming with local codes.
Unregulated Power Supplies (UPS) should also be in place just in case there is a power failure. This will insure that valuable equipment will not blow up or cause a fire. If there is a case of a power outage the UPS will provide enough time to backup important computer files and safely turn off your equipment. Some studios will have complete generator systems in place to keep the studio running for the remainder of the session.
Improper lighting can also cause buzzing ground issues, especially fluorescent bulbs. Avoid using these in any studio. Dimmers can also cause many problems. The average household dimmers will surely put a damper into a clean sound. Make sure that professional grade dimmers are installed to avoid ground noise. Always listen carefully to signals being recorded before committing to a final take. There are a countless number of accounts that the engineer discovers electrical noise on takes during the mix process.
If you are serious about your studio, may I suggest balance power or a separated panel with neutral power conditioning. The evil problems of ground issues are a direct reflection of sources returning or looking for a different ground. Voltage potential between neutral and ground will certainly change your way of looking at things... for example, .5 volts between neutral and ground is the maximum allowance by UL code that electronics will operate optimally without potential induction issues. I would suggest having a meter installed to rate this. Logging this information and having a good rapport with the local electric company would not hurt at all.
Air Conditioning/HVAC
This is another very important area that is often not considered. Studio gear gets very hot. The lack of adequate cooling could result in equipment failure or damage. Blowing up equipment is no fun and it gets very expensive. Some recording studios have a separate Machine Room for computers, tape machines and power amps that is highly air-conditioned to keep everything cool. This also cuts down on the noise from the fans on such units, which can distract concentration from listening in detail in the control room. Having too much air conditioning could also result in moisture or condensation build-up that may also damage the gear. Water in general is bad for electronic gear.
The return air system is used to pull heat out of needed areas and also provides an air intake for the AC units. These are placed in key areas where there is a build-up of heat from the gear, for example near the console or in the machine room.
Separate Rooms: Control Room
Most studios have several isolated areas for recording, mixing, and production. Soundproofing is the main agenda when creating multiple rooms in a studio. To achieve this, the main objective is to make the rooms airtight. If air cannot leak in or out of a room, there will be less chance of sound leaking in or out as well.
Most pro studios have double doors that create a sound lock to help prevent noise leakage. They also have very thick double walls with interior air gaps to also help trap unwanted sound. The floors in the studio should also be floated which means they are lifted from the ground to help further prevent extra vibrations and leakage.
The first focus would be the Control Room where the mixing console and outboard gear are contained. This is where all of the recording and mixing is controlled, hence control room. The acoustics in this room should be designed for hearing the exact sound that is being recorded or mixed. The sound of the room should be as natural as possible for accurate representation of the original sound translated to the speakers in the room.
The first rule for an appropriate acoustically treated room is that there should be no parallel walls .If you were to clap your hands in a room with hard parallel walls you would here the sound bouncing back and forth, this is known as a flutter echo. This is neither good for recording or mixing. The trapping of unwanted bass is important for a room to sound great as well. Twenty five percent of the room should be assigned for bass traps for an adequate mixing room.
Separate Rooms: Live Rooms
The next focus of equal importance would be the Live Room where the music is recorded. This is where the musicians and vocalists perform on the microphones. Live rooms should have more versatility to be able to adapt to different recording situations. Wood floors for example are great for reflection of sound, which creates a brighter tone. If a warmer tone is wanted, one could simply place a rug on the floor. Many live rooms also have a great deal of glass to see between rooms for communication. This is also very reflective. Many studios use curtains to control the amount of reflections coming off glass or hard walls. Non-parallel walls are again needed to eliminate any flutter echoes.
Some studios also contain a vocal booth within the live room. This would be a smaller room designed for vocals. They may also be used for guitar amps and other instruments. There are no rules for what this can be used for; its main purpose is for additional isolation during the recording process. Glass doors or windows are used for visibility of the artists and those working in the control room.
Many elaborate studios may have multiple control rooms and production suites. Lounges and proper bathroom facilities are important in keeping the creativity flowing. A dining area and kitchen are also a consideration if budgets permit. Many hours are spent in the studio when working on projects. It is important to have all the comforts of home to keep everyone happy.
A few proper offices are necessary for the client to be able to have private internet access and to handle business without any distractions. All studios are designed differently. Whatever can be imagined can be created. There are no rules, only guidelines.
Acoustics
Sound is a wave, much like the ripples on a still body of water when a rock is dropped into it. The larger the wave, the lower the tone. Lower tones, known as bass frequencies, travel in wide long waves while higher tones known as treble frequencies travel in a tighter, shorter wave. Frequencies heard by the human ear range from 20Hz to 20K. Just as an indication, a piano's range, probably the widest range of any instrument, is from 39Hz on the low note and 3Khz on the high note.
Sound is measured in decibels also represented as dB. An average concert is about 95-100 dB while a heavy rock concert or hip hop concert could reach levels of 130dB. This is above the threshold of pain; so don't forget to wear your earplugs which are designed to protect your hearing when in extreme sound levels. Interestingly enough, whales can actually produce levels of up to 180dB. It should be remembered that taking care of your ears is the most important thing you can do to prevent damage and have a sustained career. So don't hang out with any whales and put some protection in your ears when exposed to loud volumes.
Absorption is the act of a sound wave being soaked up by a particular material. This is measured by co-efficient ratings. The higher the sound absorption co-efficient rating, the more sound that is being eliminated from troubled spots in your room. Different section of the room may require different co-efficient ratings. Remember that studios start off as an empty shell. Hard surfaces and walls need treatment to provide for a great sounding room. For example, 20 gauge theater curtains are commonly used in studios. They consist of a thick velvet material, which is excellent for absorbing high-end frequencies. The thinner materials soak up higher frequencies.
The thicker materials soak up lower frequencies. This is why thick bass traps are very large and contain ports or holes to trap low-end frequencies. The larger the port, the lower the frequency absorption.
There are endless amounts of products and designs that are used in the industry. Wall panels are also commonly used to absorb sound. These are made from a fiberglass product wrapped in a cloth material. Various sizes and thickness are used for problem frequencies. Again the thin materials eliminate high end and thicker materials absorb low end.
Reflection is the opposite of absorption. Think of the sound as a wave hitting a mirror and bouncing back. This can be used as an advantage for a brighter tone. If a room has too much absorption causing the room to sound too dead, hard surfaces such as wood panels can be placed in strategic locations to add a more live sound to the room.
Some studios have reversible hanging panels that can be flipped between reflective and absorptive to change the room sound at will. For vocals the room may need a more dead sounding absorptive room. Drums may require a more live sounding room. John Bonham, from Led Zeppelin had an amazingly huge live reflective drum sound. This became the goal for the big Rock drum sound.
Prince is underestimated as a drummer. He has a great tight drum sound on his first record where he played all of the instruments as well as the drums. The drums have just the opposite effect using absorption in a small tight room creating a very in your face heavy Pop drum sound.
These are not rules, only guidelines. Using your ears is always the key to getting the best sound.
Designing a studio is quite an undertaking to do professionally. Each room is completely separated and isolated from one another. The most common method is to actually build a room inside of a room. The inner walls do not touch the outer walls, which creates an air gap that traps sound. Each wall can be many feet thick and multiple layers of thick glass and doors divide the rooms.
The floors in each room are floated from the ground with spacers that also create an air space to lower vibrations and help to trap unwanted sound leakage. All floors have different characteristics in the way sound waves bounce off from their surfaces. While wood floors have a warm tone, concrete and tile have a brighter tone. This also holds true for walls.
A solid plan is needed to run cabling between rooms so that each room can be interconnected with each other for microphone signal lines and headphone communication systems. Custom made cable troughs or PVC tubing is used to send groups of microphone cables from a panel to the control room. From the control room the Headphone lines would be run through the walls for communication between all of the rooms.
Materials and Tools
Drywall is needed for walls. The more layers of drywall added will increase the thickness of the studio walls. By using varying thicknesses of drywall stacked and shifted, alternating at the seams will help minimize sound transmission between rooms. Many drywall screws and a good electric drill will definitely come in handy if you are building a studio.
Fabric is used for making wall panels and ceiling clouds that control the absorption in the studio. There are specific fabrics that are designed for different frequency absorption. Each thickness and texture has varying co-efficient ratings at multiple frequency bands.
AC Duct Board and other fiberglass products are wrapped in fabric with spray glue to create absorbing panels called Wall Boxes and Bass Traps. Thermal Fiber or Fiberglass Insulation is inserted in between two sets of walls and ceiling to create an additional thickness providing an alternate texture, containing fiberglass, which is superb for capturing sound.
Sand is also an excellent alternative choice for filling walls to prevent sound wave transmission. Wood provides the skeleton for frames that hold the panels and boxes. Larger Bass Traps with large ports could be made from wood or fiberglass. RPG panels are a series of wooden slats mathematically designed to absorb and refract, or soak up and scatter sound inside a room. Wood can also be used to create custom racks to hold the outboard gear, console and patchbay. Custom studios can be designed for any situation and style.
Doors, Walls and Windows
Doors and walls are the single most important item where recording studio sound bleed is concerned. A small 1/4inch air gap at the bottom threshold of a door will release 30% of the sound. Creating airtight rooms are the first step in sealing all the gaps for optimum sound proofing. The transitions between where the rooms are connected have more possibilities for sound leakage. All corners, gaps and frames for door and window cutaways must be sealed with a silicon or caulking material. Keep in mind that if air can escape through any passage then sound will surely go through as well.
Sarit Bruno manages content and editorial line for Audiofanzine
AudioFanzine offers benchmark testing/reviews of products, software or instruments and articles of a tutorial nature, all of which are systematically illustrated by exclusive videos or audio extracts. Addressing a universal audience, both amateurs and professionals alike, http://Audiofanzine.com addresses musicians as well as sound engineers, home-studio recording enthusiasts, and audio and lighting engineers.
Article Source: How to Build a Recording Studio
Are You an Unsigned Band Looking For a Recording Contract? 3 Tips to Help You Get a Record Deal
Are You an Unsigned Band Looking For a Recording Contract? 3 Tips to Help You Get a Record Deal
By Jason Mosby
Are you an unsigned band looking to score a recording contract? Are you looking all over the internet trying to find the best way to get a record deal? If you don't know how to get a record deal, or even where to begin to make contacts with music artist management, here are some tips for you to make the process of getting a record deal easier.
1. Take the pressure off. When you are an unsigned band and you're concentrating on getting a recording contract, it can take over your life. You start to feel the hunger and desperation of finding a record label or a music artist manager and forget about everything else. Don't let this happen to you. Be sure that you also concentrate on making music and performing and doing other things that make you happy, or it will begin to show in your music and decrease your chances of getting signed. Yes, making music is a business, but don't forget that first and foremost, you love music and you love performing. Don't let that take a back seat to your desire to be signed to a record label or you might regret it later.
2. Start promoting your music and connecting with the fans on your own. As an unsigned band, you will become much more attractive to the music labels if you have a following. So get yourself out there not only locally, but also on the internet. Make Facebook, MySpace, and YouTube accounts for your band and drum up some interest. It will definitely help record labels find your band, plus whenever you do start talking to artist management or recording labels, you will have something to show them besides music and a local following.
3. Pick record labels you know will be interested in your music. As an unsigned band, you want to increase your chances of getting heard by a scout or manager in every way possible. So make sure that you are targeting specific labels and band managers that have expertise in your genre of music. Don't submit your music to everyone everywhere in the hopes you'll catch come attention. Targeting those that have already signed bands in your genre will increase your chances of getting a recording contract astronomically! Plus it will save you money, time, and energy because you aren't wasting your efforts on labels or managers who aren't interested.
Want to know the steps necessary to get signed and get a record deal
Article Source: Are You an Unsigned Band Looking For a Recording Contract? 3 Tips to Help You Get a Record Deal
By Jason Mosby
Are you an unsigned band looking to score a recording contract? Are you looking all over the internet trying to find the best way to get a record deal? If you don't know how to get a record deal, or even where to begin to make contacts with music artist management, here are some tips for you to make the process of getting a record deal easier.
1. Take the pressure off. When you are an unsigned band and you're concentrating on getting a recording contract, it can take over your life. You start to feel the hunger and desperation of finding a record label or a music artist manager and forget about everything else. Don't let this happen to you. Be sure that you also concentrate on making music and performing and doing other things that make you happy, or it will begin to show in your music and decrease your chances of getting signed. Yes, making music is a business, but don't forget that first and foremost, you love music and you love performing. Don't let that take a back seat to your desire to be signed to a record label or you might regret it later.
2. Start promoting your music and connecting with the fans on your own. As an unsigned band, you will become much more attractive to the music labels if you have a following. So get yourself out there not only locally, but also on the internet. Make Facebook, MySpace, and YouTube accounts for your band and drum up some interest. It will definitely help record labels find your band, plus whenever you do start talking to artist management or recording labels, you will have something to show them besides music and a local following.
3. Pick record labels you know will be interested in your music. As an unsigned band, you want to increase your chances of getting heard by a scout or manager in every way possible. So make sure that you are targeting specific labels and band managers that have expertise in your genre of music. Don't submit your music to everyone everywhere in the hopes you'll catch come attention. Targeting those that have already signed bands in your genre will increase your chances of getting a recording contract astronomically! Plus it will save you money, time, and energy because you aren't wasting your efforts on labels or managers who aren't interested.
Want to know the steps necessary to get signed and get a record deal
Article Source: Are You an Unsigned Band Looking For a Recording Contract? 3 Tips to Help You Get a Record Deal
Recording The Guitar to a Computer
Recording The Guitar to a Computer
By Brian Murphy
You want to record your guitar, make your own riffs, music, etc. You want to plug your guitar into your computer? How to connect the guitar to the computer the right and best way? What software? Which audio interface? What about your favorite guitar effects? What computer? Where to start? It can be overwhelming. The recording guitarist's computer setup should be something like this:
Guitar (*GTR with 13 pin connection recommended)
Microphone for recording Acoustic guitar, vocals etc.
Quality guitar cable
Audio Interface-Firewire (recommended) or USB
Guitar/midi interface
USB/Firewire cables
Computer (Mac recommended or PC)
Extra external/internal Hard Drive (recommended)
Audio recording/sequencer software
Plug-ins: effects- reverb, compressor, delay, chorus, etc
Dedicated guitar effects/amp simulation
Sampler/synths (for 13 pin guitarists or guitarist who can play keyboards)
Quality cables to speakers
Powered Speakers
Headphones (so you do not disturb the wife an kids at those late weekend sessions).
-Setting up your whole live rig and putting a microphone in front of the your cabinet, playing at loud volumes so you get the amp to sound right, push the speaker enough, putting your speaker in a closet, using a blanket to damping volume, etc.
-You could use a load on you speaker and record direct.
-Use a preamp that is compensated for direct recording as the front end. You can plug this into outboard effects or add plug-ins
-You could record from your pedal board or any outboard multi-effects you might own. You probably end up with a direct type sound. Some multi-effects have amp simulation that might take the edge off the direct sound. With any of these scenarios you are committing yourself to the recorded track. If you record with effects, you can't change it later. You would have to re-record! And if you do not re-record on the same day or you have to come back and have to set up the rig again, hopefully the knobs setting were written down, place the speaker in the same place etc, etc.... If you get into the recording other instruments or mixing the song and you want to change the guitar sound, tone, effects, etc, -- you have to re-record!
With a guitar with a 13 pin connection, either internally or a pickup installed on the body, you get 100% use of your software. You can record your guitar sound and get access to any software synths or samplers that come with the software or as a plug-in add-on. With a software computer base system, you can change almost everything after you have recorded--amps, effects, mics, mic placement and more. You do this with plug-ins. You can save all your presets, sounds, etc. You could have multi-guitar tracks with different settings all from recording one track. The flexibility is there! Yes, there are purists out there- "software can't sound like tubes". Well, the software is getting pretty close!!!! There is a lot of software out there. You do not have to spend a lot of money AND it is always improving. You buy a box. (i.e.hard disk recorders, and others mentioned above), you have bought a box. You usually can't upgrade without buying a new box. People use computers every day at work or home- Microsoft Office (Word, Excel Power Point, etc) Email, Internet. Use it to record your guitar and music!!
Hopefully, this helps and you can check out more at http://www.guitarhelper.net
Brian has 18 years experience in the Music Industry. He can be contacted at brian@guitarhelper.net
Article Source: Recording The Guitar to a Computer
By Brian Murphy
You want to record your guitar, make your own riffs, music, etc. You want to plug your guitar into your computer? How to connect the guitar to the computer the right and best way? What software? Which audio interface? What about your favorite guitar effects? What computer? Where to start? It can be overwhelming. The recording guitarist's computer setup should be something like this:
Guitar (*GTR with 13 pin connection recommended)
Microphone for recording Acoustic guitar, vocals etc.
Quality guitar cable
Audio Interface-Firewire (recommended) or USB
Guitar/midi interface
USB/Firewire cables
Computer (Mac recommended or PC)
Extra external/internal Hard Drive (recommended)
Audio recording/sequencer software
Plug-ins: effects- reverb, compressor, delay, chorus, etc
Dedicated guitar effects/amp simulation
Sampler/synths (for 13 pin guitarists or guitarist who can play keyboards)
Quality cables to speakers
Powered Speakers
Headphones (so you do not disturb the wife an kids at those late weekend sessions).
-Setting up your whole live rig and putting a microphone in front of the your cabinet, playing at loud volumes so you get the amp to sound right, push the speaker enough, putting your speaker in a closet, using a blanket to damping volume, etc.
-You could use a load on you speaker and record direct.
-Use a preamp that is compensated for direct recording as the front end. You can plug this into outboard effects or add plug-ins
-You could record from your pedal board or any outboard multi-effects you might own. You probably end up with a direct type sound. Some multi-effects have amp simulation that might take the edge off the direct sound. With any of these scenarios you are committing yourself to the recorded track. If you record with effects, you can't change it later. You would have to re-record! And if you do not re-record on the same day or you have to come back and have to set up the rig again, hopefully the knobs setting were written down, place the speaker in the same place etc, etc.... If you get into the recording other instruments or mixing the song and you want to change the guitar sound, tone, effects, etc, -- you have to re-record!
With a guitar with a 13 pin connection, either internally or a pickup installed on the body, you get 100% use of your software. You can record your guitar sound and get access to any software synths or samplers that come with the software or as a plug-in add-on. With a software computer base system, you can change almost everything after you have recorded--amps, effects, mics, mic placement and more. You do this with plug-ins. You can save all your presets, sounds, etc. You could have multi-guitar tracks with different settings all from recording one track. The flexibility is there! Yes, there are purists out there- "software can't sound like tubes". Well, the software is getting pretty close!!!! There is a lot of software out there. You do not have to spend a lot of money AND it is always improving. You buy a box. (i.e.hard disk recorders, and others mentioned above), you have bought a box. You usually can't upgrade without buying a new box. People use computers every day at work or home- Microsoft Office (Word, Excel Power Point, etc) Email, Internet. Use it to record your guitar and music!!
Hopefully, this helps and you can check out more at http://www.guitarhelper.net
Brian has 18 years experience in the Music Industry. He can be contacted at brian@guitarhelper.net
Article Source: Recording The Guitar to a Computer
Music Studio Vs Home Recording Studio
Music Studio Vs Home Recording Studio
By Francis Turner
Many of us at some point in our lives dream of becoming a vocalist or a band member. We want to enter the music industry, share our talent and show our passion for music. But the question, most aspiring musicians ask themselves is "where should I start?" The answer is to create your own music or sample of your composition. This usually takes time because you need to practice so you can present your own music with great beats and wonderful lyrics. Now, how can you possible practice and perfect your music? Of course you need to practice in a music studio or have your very own home recording studio.
But first how could you have your own home recording studio? In the past only well-off music aspirants can afford their very own recording studio and that is because of the high tech equipments needed to create music. Well, they can opt to go to a music studio, use their equipments and pay hourly charges or monthly membership fees. Some music studios charge you high hourly rates which is sometimes impractical especially if you have no enough budget for such fees.
Below are some of the important instruments and equipments you can find and use in a music studio.
Microphone
- The very first thing a singer/composer should have during a recording session
Keyboard
- It is not just a musical instrument but it is also needed in creating the rhythms in your songs which is much easier than other instruments.
Mixing Console
- Also referred to as audio mixer, this is where you will adjust timbre and level of sounds in your songs.
Studio Monitors
- These are loudspeakers used for the audio production.
Multitrack Recorder
- This is a recording gadget that could actually record a multiple source of sound which in the end could create a whole track.
Digital Audio workstation
- This is where all the electronic gadgets are being controlled and adjusted
Effects
- An added feature that can make additional spectacle in your recording.
These are only some of the equipment you'll surely found on a recording studio but with the continual advancement of technology, you can have your own recording studio at home with less equipments needed. There are four basic equipments you can buy to set up your own home recording studio.
Microphone
- A basic equipment which can now be bought at a low price but with the same great quality.
Audio Interface
- You could consider it as a sound card on your computer and the good thing is there are some interfaces where you could connect your playing instrument like keyboard and guitar. The price of this gadget ranges from $150-$250.
Computer
- This is considered the heart of your home music studio. The best brand that you could get is MAC computer since it has its own recording software called "GarageBand Built In"
Software
- There are many software available in the market that you could use, some are free and some are not. Choose a home recording software that is easy to use, flexible and can allow you to create different beats.
Room
- Of course, it is best to have your own small space so you can concentrate in creating your own music.
Having your own home music studio is now possible. So, if you'd like to be a great musician someday start practicing now in your own music studio.
Would you like to have a home recording software that is easy to use and is packed with everything you want? Click on the link to know the best music software that can help you create your own music.
http://www.squidoo.com/besthomerecordingsoftware.
Article Source: Music Studio Vs Home Recording Studio
By Francis Turner
Many of us at some point in our lives dream of becoming a vocalist or a band member. We want to enter the music industry, share our talent and show our passion for music. But the question, most aspiring musicians ask themselves is "where should I start?" The answer is to create your own music or sample of your composition. This usually takes time because you need to practice so you can present your own music with great beats and wonderful lyrics. Now, how can you possible practice and perfect your music? Of course you need to practice in a music studio or have your very own home recording studio.
But first how could you have your own home recording studio? In the past only well-off music aspirants can afford their very own recording studio and that is because of the high tech equipments needed to create music. Well, they can opt to go to a music studio, use their equipments and pay hourly charges or monthly membership fees. Some music studios charge you high hourly rates which is sometimes impractical especially if you have no enough budget for such fees.
Below are some of the important instruments and equipments you can find and use in a music studio.
Microphone
- The very first thing a singer/composer should have during a recording session
Keyboard
- It is not just a musical instrument but it is also needed in creating the rhythms in your songs which is much easier than other instruments.
Mixing Console
- Also referred to as audio mixer, this is where you will adjust timbre and level of sounds in your songs.
Studio Monitors
- These are loudspeakers used for the audio production.
Multitrack Recorder
- This is a recording gadget that could actually record a multiple source of sound which in the end could create a whole track.
Digital Audio workstation
- This is where all the electronic gadgets are being controlled and adjusted
Effects
- An added feature that can make additional spectacle in your recording.
These are only some of the equipment you'll surely found on a recording studio but with the continual advancement of technology, you can have your own recording studio at home with less equipments needed. There are four basic equipments you can buy to set up your own home recording studio.
Microphone
- A basic equipment which can now be bought at a low price but with the same great quality.
Audio Interface
- You could consider it as a sound card on your computer and the good thing is there are some interfaces where you could connect your playing instrument like keyboard and guitar. The price of this gadget ranges from $150-$250.
Computer
- This is considered the heart of your home music studio. The best brand that you could get is MAC computer since it has its own recording software called "GarageBand Built In"
Software
- There are many software available in the market that you could use, some are free and some are not. Choose a home recording software that is easy to use, flexible and can allow you to create different beats.
Room
- Of course, it is best to have your own small space so you can concentrate in creating your own music.
Having your own home music studio is now possible. So, if you'd like to be a great musician someday start practicing now in your own music studio.
Would you like to have a home recording software that is easy to use and is packed with everything you want? Click on the link to know the best music software that can help you create your own music.
http://www.squidoo.com/besthomerecordingsoftware.
Article Source: Music Studio Vs Home Recording Studio
Subscribe to:
Posts (Atom)